FFXI Tool "Automation Info" Final Fantasy for Puppetmaster!

Updated 12/09/2008: Fixed memlocs

------

This application shows some realtime stats of your automaton.
Currently it can show the following information:

- Automaton name
- HP, MP, TP
- Melee, Ranged, Magic skill

I made this so you don't have to go to the menu all the time to check your automaton HP/MP etc.



Full interface customization:


Requirements
- .NET Framework 2.0 or 3.x
- Windows XP, Vista 32/64 bit

Instructions
Run the application after you started FFXI (when you're ingame).
You can move the window by holding your right mouse button down and dragging it.

You can almost fully customize the look of the application. You can do this by
selecting the settings option in the menu. Currently the following settings are available:

Background
- Disable background: makes the background transparant.
-- Note: in this state you can only move the form by clicking on the letters. You can access the menu in the taskbar.
- Enable Background Image: Enable or disable the background image
-- Browse: Select a custom background image. Please only select .jpg or .gif images or the application may crash
- Select Color: When the background is disabled this background color will be shown.



Automaton stats
When you select a stat you can check or uncheck the checkbox to let the stat show or hide in the application.
Once a stat is selected you can change the following settings:
- Label color: The color of the label like: HP, MP, TP etc.
- Value color: the color of the value after the label like: 861/861, 0% etc.
- Enable critical color (only available for HP, TP, MP): Here you can select the color of which the value has to be when the
stat reaches the critical status (sorry for the bad explanation)
- Critical percentage (only available for HP and MP): The percentage which the critical color will be applied.



Advanced
FFXI Process
- Here you can select the FFXI instance. If you have 2 or more instances of FFXI running you can select
the correct instance here.
NOTE: - Start AutomatonInfo after all FFXI instances are started.
- AutomatonInfo will exit when one of the instances is closed.
Refresh Rate
- Here you can select the refresh rate of which the data on the screen is updated. Set the refresh rate lower for slower computers.
Reset settings
- Reset all the settings to their default values



To exit the application Right-click on the window and select "Exit".

Further notes
- Don't mess with the AutomatonInfo .config. This file is used to save all the settings.
- If the TP doesn't update after activation/zoning: Stand next to your pet a few seconds. It will be updated again.

Current known issues
- The application may crash when exiting an FFXI instance.

Version History

V1.3 (18-10-2008)
- Added "Automaton log". You can enable it by going to the Automaton stats in the options window (very experimental and minimalistic)
-- Shows automaton dmg and total dmg in a seperate window.
-- Also shows when the next Flashbulb is ready.. more to add later.

V1.2.1 (10-16-2007)
- "Activate time" now shows the correct time with every subjob.

V1.2 (10-14-2007)
- Moved Automaton stats to a new tab called "Automaton stats".
- Background tab:
-- Added the option to make the background transparant
- Automaton stats tab:
-- Added a new stat: Activate time. This shows how much time there is left till the ability activate is ready.
-- Added color customization for labels, values and critical.
-- It's now also possible to show or hide the automaton name
- The program is now shown in the taskbar.

V1.1.1 - 10-04-2007
- Vista 64 support
- Long automaton names now display properly.
- Right and left mouse clicking now works on all areas of the window

V1.1 - 09-30-2007
- Fixed flickering while moving the screen
- Window position will be saved when the users exits the application
- New settings window.
-- Appearance
--- Set background image
--- Set background color
--- Set background opacity
--- Show/hide automaton stats
-- Advanced
--- FFXI process selection
--- Refresh rate
--- Reset settings

V1.0
- First version

Download
Download AutomatonInfoV1.5 - Updated 3/23/2012

Final Fantasy XI Tool "Treasure Pool Viewer" Download FFXI

Program views your Treasure box and when it notices a change in pool data, it starts a 5minute timer of when the item will autodrop.

Uses:
So you don't constantly view your treasure pool in dynamis.
For those last second snake lots.

Issues:
When items with the same ID force the other out of the treasure pool, the timer doesn't reset.
Items not sorted as the Treasure pool is.
Need namechanger plugin for it to work.

Its my first program for ffxi, and the code is kind of sloppy for now. I work on it when I have time. It was created in VB6, I hope you virusscan it, like you would any program you download from the internet.


Edit:
Added Always on top mode.
Added different method for getting processID.
Made BG Customizable.

============================================
Edited: By DAKPluto Updated - June 20th 2007

New offset:

[Offset]
TM=9068864


============================================
Edited: By Wiccaan Updated - June 23 2006

If you read through the topic you will notice Im helping Gov with this somewhat. Ive updated this program to work with the new offset. As well as added a few features and fixed the code up some.

Fixes:
- Fixed Offset
- No longer needs static window name.
- Fixes to code. Editing and removed unneeded / unused things.
- Fixed some functions and such.

Changes:
- Ability to set font colors.
- Ability to use a solid color for the background instead of just an image.
- Ability to change offset via INI file.
- Added readme file and cleaned up the ini file.

Any questions I can try to help Gov answer. Any requests for this program I can try to add and fix.

Click here to download
(Working Version!)

As always, scan the file before using. If you didnt get it from here then dont trust it.

Updated : Jun. 22, 2006
- Fixed Timer and API Problem

FFXI Tool Basic Time of Death Monitor TOD HNM - NM - Anything! ( Final Fantasy XI)

How to use:
1. Using the sliders, select the hours (up to 99), minutes, and seconds until the mob is supposed to pop again.
2. Optional: Enter a name for the mob so you can tell the entries apart.
3. Click the "Add Time of Death" button or hit your selected hot key (default is Ctrl-D).

That's it.

The button in the upper left corner will give a menu that allows setting the always on top option, transparency of the window, and the hot key. It will also give the option to clear all entries from the list.

The "Remove Selected" button will remove the currently selected entry from the list.

The window will display the current local Earth Time and Vana'diel Time (both based on your system clock).

The list will display the mob's name, the ToD in Earth and Vana Time, the repop time in Earth and Vana Time, and a countdown to when the repop will happen.

You can close out the program between sessions and it will remember the list the next time you start it. Any entries that are past their repop times will be removed automatically.

Link to download: ToD Monitor, v0.01.07

I hope this is found useful. Enjoy.

FFXI Tool ( Shadow-Cast ) Final Fantasy XI Utsusemi tool

Functions of ShadowCast:

CURRENT VERSION 2.2
Shadow Related

• Auto Casting of Ni and Ichi based on main and sub job and levels (will not cast ni unless main = Nin or sub = Nin) + Lv > 36).
• Shadows Overlapping & Cancelling (starts casting when 1 shadow remaining + cancels Ni when Ichi is cast).
• Sleep, Silence & Amnesia Support (if you cant cast from menu it wont cast).
• Only casts when engaged.
• Counters read when shadows cast manually from menu (will update counter if you cast in game).
• Auto Casting can be turned off.

War & War Sub Functions - Removed until 3.1.30 is released

• Auto Berserk and Warcry (based on Main/Sub and Level).
• Auto Agressor(when WAR is main job).

On-Screen Displays

• Shadow Counter(option to display Count or "Shadows:" + Count).
• Tool Counter(can customise which tools you want on screen)
• Displays do not need to be shown for Shadows to be cast.
• Custom Posistioning of all Displays.
• Tool counters change colour depending on number left(White =>25,Yellow 5-25, Red <=5).

Misc. Options

• Windower 3.4 and 3.3 Support(defaults to 3.4 code unless option is changed)
• Transparency(100%,80%,50%,20%,10% and Custom)
• Auto Debagging of tools(needs to be enabled in config optionis are just Shihei or All. Only when engaged and 1 tool remaining).
• Minimise to taskbar option.
• GUI Config(can customise how the app starts each time which tools to show refresh rates for chat monitor cancel timer on ichi cast + loads more)
• Debug Logs(creates a Log.txt file which will save all events incase of errors/functions not working properly so you can post on this thread).

Bugs

• Vista x64 crashes - looking into this atm.

In Development

• Minimum Inventory Space before debagging of tools(set in config so you set to 5 you need to have 6 or more free spaces before app will auto debag tools).
• Inventory counter.
• Elemental tool counters.

Additional Info

• Please use all files in Zip unless you are updating versions(for update copy dll's and exe)
• If you want more functionality post here and I will see what I can do.
• If you have problems and you have latest version pls post the log.txt file or cut and paste the problem text from it.
• Readmet file added with howto, requirements and link to latest fface.dll.

Enjoy!!

ShadowCast Latest Version

Beta Removed until 3.1.30 is released.

DatPwner - A DAT Swapping Tool for FFXI ( Tools ) [ Final Fantasy XI ]

Note: This app is written in AutoIt, so some virus scanners will give FALSE POSITIVES when scanning just because of the language used.
Source is included in data\source if you want to make sure its clean or to laugh at my crappy coding.

Basically its a DAT/BGW/SPW swapping tool made so files can be easily and quickly swapped without losing original SE DATs. Mods are crosschecked with one another(can be disabled in INI) so custom DATs don't overwrite other custom DATs.

Mods are comprised of the custom DATs, a file called index.txt, a 480x200 JPG preview image (optional) and info.txt (optional). Index files are basically name_of_dat>>dat_to_replace. More info about index files in the readme.

The Edit window uses AltanaViewer model lists. The included lists are sorted alphabetically to make it easier to locate specific items. A list sorting tool is included to sort AV lists if you like alphabetized lists instead of the 'newest updates' type list.

Pic:


Hopefully mod authors will utilize this tool in the distribution of custom DATs since its very easy to just unzip a file and then enable a mod instead of having to rummage through model viewers, make a backup copy of original DATs, then finally copy the DATs over.

Download: http://dollarfiles.net/dl.php?file=398

Enjoy

FFXI Tool (Speed-Hack) Minish [ Final Fantasy XI ]

Just the other night while I was browsing I stumbled across a site, that appears to be a bit new. This tool "Minish" is a speed hack for FFXI.


"Minish 4.0 Download Here
Updated as of 07/23/07

Fixed Freezing
added a stop button
added new speeds.
Fixed Known bugs.

What is Minish? Minish is a speed tool that uses your system time to make you speed-hack.

Requirements:
Windows XP,32x, 64x Vista 32x, 64x (Must run as Administrator) if you don't know what i mean email me.
Net Framework 2.0
Features:
Speed range: 7 – 60 MPH
Loops: None, Set loop, Auto, and AutoNoPause"only works for 60MPH"
Stop Button: Hit the period button on your key board or hit the stop button on the application to stop the loop. Note that you will still be speed hacking until it is done with it's last loop.

You should probably update your system time after you are done using this speed hack program. How can you update? you can update your system time by double clicking your system time in the bottom right hand corner of your desktop. after that click the tab labeled internet time and then update now.

What does this program do? This program changes your current system time ahead in sec making you speed-hack.

This program does not interact with pol or ff-xi, this program only changes your system time.
Use at your own risk. i am not liable for accounts being banned or suspended."